![background image](http://html1.mh-extra.com/html/baby-jogger/city-go-2-rapidlock/city-go-2-rapidlock_manual_3199423022.webp)
22
1 Before installing base, make sure
vehicle is on level ground.
2 Place the base flat on the vehicle seat.
Push it back until the front of the base
touches the vehicle seat back. Center
the base between the lower LATCH
anchors.
If allowed by your Vehicle Owner’s
Manual, the center seating position
may be used if the anchor spacing is
11” (28 cm) or greater.
3 Pull the RAPIDLOCK
TM
release lever
and raise the lock-off to expose the
LATCH storage door.
BASE INSTALLATION - LATCH
2
3
1