Baby Control Digital BC-200 Instructions For Use Manual Download Page 14

Temporary/permanent suspension of TWIN MODE

(BC-220i, BC-230i)

Baby Control Digital breathing monitor of BC-220i and BC-230i types for twinsmay also be used for only one baby. Before that 

the device must be switched from the twin mode into one-baby mode. This meansa

 permanent 

switching from one mode to 

another - 

not to be confused with a temporary suspension of the twin mode!

1.  When switched off, press the on/off button (1) and hold for approximately 30 seconds until letters „S” - „E” appear.

     Release the on/off button (1).

2.  The display shows alternating values „1” and „2”.

3.  If you press the on/off button (1) while „1” is displayed, Baby Control Digital breathing monitor will be set to the

     one-baby mode and should be operated according to instructions described above. 

4.  If you press the on/off button (1) while „2” is displayed, the twin mode is set. 

Temporary suspension of TWIN MODE 

Baby Control Digital breathing monitor offers you the option of

 temporary suspension of the twin mode

 in case that one 

baby is still sleeping, but the other had to be taken out of the bed for any reason. 

1.  For temporary suspension of the twin mode shortly press the on/off button (1) once. This will cause the temporary

     change to the one-baby mode.

2.  The red flashing indicator light (6 or 7) on the side where the baby is not present warns you not to forget to change the

     device back to the twin mode after the second baby is returned to the bed on the sensor pad (11) connected into an 

     appropriate socket (9 or 10).

3.  The twin mode is restored by shortly pressing the on/off button (1) again.

IMPORTANT: 

Baby Control Digital breathing monitor is wholly  independent of 230V network and operates 

exclusively at low voltage. An electric shock is practically impossible! The device does not generate or emit any 

electromagnetic or other radiation. The use of the device is perfectly safe.

IF YOU HAVE ANY SUSPICION OF DEFECT, DO NOT USE THE DEVICE UNDER ANY CIRCUMSTANCES!

Technical specifications of Baby Control Digital breathing monitor

(BC-200, BC-210, BC-230, BC-220i, BC-230i)

Baby Control Digital   

 

 

 

 

 

 

           14

Summary of Contents for BC-200

















Reviews: