APP
MODULE Documentation
34 BAB TECHNOLOGIE GmbH
5.3.4
ENOCEAN DEVICE TEACH-IN PROCEDURE
All EnOcean devices within range are displayed both in the device list and in the telegram list as they
are sending something. As already mentioned, the EnOcean telegram must be connected with a group
address in order to make it usable for the
APP
MODULE. This is done as follows:
1.
Mark the device of interest in the device list.
Figure 29: Calling up properties
All Devices:
Show all devices
Configured Devices:
Show only the devices which have already been configured
New / Unnamed Devices:
Show only the new and unnamed devices
Advice: If you are not sure which device has which Trans. ID, activate the device of interest and look up
in the device list for which device the telegram counter increases (column "telegrams").
2.
When you have detected the device of interest, mark it with the mouse, press the right mouse
button and click '
Properties
'. Alternatively, double-click on the device.
3.
The window "
EnOcean Device Configuration
" will open. Via this dialogue, the EnOcean devices
will be "adapted.
Figure 30: EnOcean Device Configuration