B9Creations B9Clean, User Manual

Page: 5 / 25

B9Clean General Information
B9Clean is a 3D print cleaning system supplied by B9Creations, LLC, Rapid City, SD, USA.
For proper cleaning of 3D printed articles, this unit utilizes isopropyl alcohol. Isopropyl alcohol is
utilized to maintain part geometry, properly and sufficiently clean parts, and leave no known
harmful residue on 3D printed articles. Design considerations have been implemented to
significantly reduce the possibility of spills and vapors.
In harmony with the inherent implemented design precautions, the OPERATOR MUST:
• Fully read and understand these Instructions For Safe Use
•
Handle and store isopropyl alcohol with extreme care, adhering to standard laboratory
and statutory standards, practices and laws
•
Operate the B9Clean at a safe distance from all open flames, sparks, and heat sources.
NEVER operate the B9Clean with the top cover removed or not properly seated
•
NEVER operate the B9Clean in an unsafe manner
•
Operate the B9Clean ONLY according to the intended use
These working instructions apply to:
Type of machine
Description
B9Clean Enclosed isopropyl alcohol agitator
for cleansing resin-based 3D printed
parts of excess uncured resin
The B9Clean is an easily operated, laboratory-grade 3D print cleaning unit to be used in accordance with
the manufacturer’s instructions, cleaning 3D printed parts that are cured from resin and within the
supported part size range.
The B9Clean has an integrated controller installed inside the base casing. The firmware required for all the
operations is pre-installed and ready for use. The provided AC/DC power supply (XP Power Verus 120-JA
and acceptable alternate Triad Magnetics WSX 120-2000) has been tested and is considered part of the
cleaning equipment.
1.1 Declaration of CE Conformity
B9Clean is a 3D print cleaning unit designed, manufactured, and certified according to the following
directives, regulations and standards:
§
RoHS
§ FCC
§
LOW VOLTAGE DIRECTIVE 2014/35/EU
•
EN61010-1
§
ELECTROMAGNETIC COMPATIBILITY DIRECTIVE 2014/30/EU
•
EN55014-1
•
EN55014-2
We, B9Creations, LLC, herewith declare that this device fulfills the basic safety requirements of mentioned
standards, regulations and directives. In any case of non-authorized modification, abnormal use, or misuse