B9Creations Core Series Printer User Manual Rev. A-3
04-14-2020
printing process. Open the door only when necessary.
NOTE
Pausing a print can cause a deformity or undesirable feature in the printed object. Avoid pausing the
print if a precise printed object is needed. Operator must determine if paused print has affected the
quality of the printed object.
NOTE
Pressing the Abort (B) area will completely stop the printing process. The printer will stop printing, and
the failed/aborted print part must be removed from the build table. 9.12.6 Print Finished
Upon completion of the print job or after selecting to Abort a print,
the touchscreen will display the
Print Finished
page.
NOTE
For best printing results, allow the DuraVat to recharge per section 10.1.4 after each print.
9.13 Removing the Build Table and Printed Object from the Printer
Upon completion of a print or after an aborted print, the Build
Table with attached printed object must be removed from the
Build Chamber. Loosen Lock Knob (A) by turning it
counterclockwise one turn. Slide Build Table (B) out the front of
Build Chamber.
NOTE
Do not remove Lock Knob from Build Table Assembly.
9.14 Removing the Printed Object from the Build Table
Once the Build Table is removed from the Build Chamber, use a plastic Print Scraper or Plastic Blade to
scrape or pry the printed object (A) from the Build Table (B).
B
A
