8
Castor brakes
Check that castor brakes work effectively on a regular basis. If brakes do not lock effectively, have the defective
castor(s) replaced immediately by one of the service points listed under Repairs.
The unit may only be repaired by the following service points:
•
In-house, by B.PRO-trained professionals
•
External, B.PRO-trained customer service
•
B.PRO Service
•
For repairs to the refrigeration system: Specialist refrigeration company
The warranty will be invalidated if repairs are carried out by anyone else.
Hygiene regulations
When keeping food cool, observe the relevant regulations on foodstuffs as well as the characteristics of the food in
question.
You must comply with the specifications in Regulation (EC) no. 852/2004 and your national hygiene regulations.
Caution!
Possible impairment of food quality
The quality of the food stored in the unit may be impaired if a power failure, unit malfunction or
other interruptions occur during storage or regeneration.
If the core temperature has
fallen
, check whether the food quality has been impaired and
dispose of any spoilt food if necessary.
Cleaning methods
Only use approved cleaning methods (see section on cleaning and care).
Do not use a steam jet unit or high-pressure cleaner.
Disconnect the unit from the power supply before cleaning or maintenance work or replacing parts. Keep the mains
and/or unit plug in a suitable place where it is protected from moisture, damage and dirt while carrying out work.
Personal protective equipment.
Wear personal protective equipment (e.g. safety shoes, protective gloves, protective eyewear, etc.) in order to
counteract static charge.
Also use the personal protective equipment specified by the cleaning agent manufacturers. See the safety data sheets
for the cleaning agents.
Change of location
Before transporting the unit, corresponding measures must be taken to ensure safe transport. The location of the unit
must also meet the requirements of directives, regulations, other rules of the German Employers' Liability Insurance
Association and any other applicable national provisions in the countries of use.
Remove any objects from the unit top before changing its location. Objects can slide off the unit top or the unit can tip
over when pushed.
Hold unit door closed while changing its location; otherwise objects may fall out of the unit when it is pushed.
With the door closed, the unit can be tilted to an angle of 5° while standing still. Only cross sloping surfaces with an
incline of less than 5°.
If the unit is on a sloped surface, it must be secured against rolling away with additional measures (e.g. wedges) in
addition to locking the brakes.
-en-
Summary of Contents for COOK CLASSIC BC UCT 2D
