B.Pro B.PROTHERM BPT 1020 EUK, Translation Of The Original Operating Instructions, Page: 36 / 48

B.PROTHERM Stainless-Steel, Cooled
– 32 –
Checking the door seal

The door seal must be checked regularly for damage.

Check door seal for damage (visual inspection).

If damage is present, contact one of the following:

In-house, by B.PRO-trained technician

Externally, by B.PRO-trained customer service engineer

B.PRO Service
Checking seals on air baffle

The seals of the intake and blow-out opening on the air baffle must be
checked regularly for damage.

Check seals for damage (visual inspection).

If damage is present, contact one of the following:

In-house, by B.PRO-trained technician

Externally, by B.PRO-trained customer service engineer

B.PRO Service
Performing maintenance on seals

To extend the life of the unit seals, treat the seals regularly (monthly) with
a commercial care agent.
Checking locking brakes

The locking brakes must be checked for effectiveness every time the unit
is moved to a new location.

Lock the locking brakes.

Try to move the unit while the brakes are locked (do not use excessive
force!).

If the effectiveness of the brakes is not sufficient, have the defective cas-
tor replaced immediately by one of the following:

In-house, by B.PRO-trained technician

Externally, by B.PRO-trained customer service engineer

B.PRO Service
Commission a periodical
electrical safety inspection

At least once every six months, have a periodical electrical safety inspec-
tion carried out by a professional electrician in accordance with the DIN
VDE 0702 series of standards.
Checking the connection cable
and power plug

At least once every six months check the cable and power plug for
mechanical damage and signs of excessive aging in accordance with
BGV A 3 or the corresponding national regulations.