B.Pro B.PROTHERM BPT 1020 EUK, Translation Of The Original Operating Instructions, Page: 22 / 48

B.PROTHERM Stainless-Steel, Cooled
– 18 –
Keeping food cool
I
The unit can keep food cold for an extended period of time even if it is
unplugged, as the unit is well insulated. The unit fulfills the specifications
of Thermal Class B pursuant to DIN EN 12571.

Unit connected to an electrical outlet

Unit door closed

Unit in refrigeration mode and not in standby-mode (temperature display
shows actual temperature in unit interior;
OFF
is displayed in standby
mode)

Eutectic plate(s) inserted in the unit if necessary.

Condensation-water catch tray pushed in under the floor panel as far as
the stop

To achieve the best possible refrigeration, do not open the unit door
unnecessarily.

Leave refrigeration switched on until the food is removed from the unit
gain.

Change the setpoint temperature if necessary.

Chapter "Setting the setpoint temperature" on Page 14.
Shut down refrigeration (standby
mode) and restart it.
I Refrigeration can be interrupted with the "Refrigeration ON/OFF" button
(standby mode).

Press the "Refrigeration ON/OFF" button.
The unit switches into standby mode. The temperature display will now
show
AUS
(OFF).

To restart refrigeration, press the "Refrigeration ON/OFF" button again.
The temperature display will show the current temperature in the unit inte-
rior again.
The unit is now in refrigeration mode.
Removing food
Warning!
Danger of tipping when center of gravity is at the top of the unit!
If the lower Gastronorm containers are removed from the unit first, the unit's
center of gravity shifts upward. There is a danger of the unit tipping over. A
tipping unit can cause serious injuries!

Always only unload the unit from the top down.

Open the unit door.

Remove Gastronorm containers of food in dishes.

The unit must be cleaned thoroughly after use.

Chapter "Cleaning and care" on Page 26.