B.Pro B.PROTHERM BPT 1020 EUK, Translation Of The Original Operating Instructions, Page: 28 / 48

B.PROTHERM Stainless-Steel, Cooled
– 24 –
Food varies greatly in temperature
Increased amount of
condensation water in
condensation-water catch tray
Temperature display of
temperature regulator flashes –
temperature overshoot
Temperature regulator is in an
irregular condition.

Pull the power plug and reinsert it
after approx. 10 seconds.

If this does not solve the problem and
the causes we have already men-
tioned can be ruled out, notify an
authorized repairs facility.

Chapter "Repairs" on Page 33.
Refrigeration unit failed or dam-
aged.

Notify a facility authorized to carry out
repairs.

Chapter "Repairs" on Page 33.
The unit electronic system is
defective.

Notify a facility authorized to carry out
repairs.

Chapter "Repairs" on Page 33.
Cause Action
Cause Action
Air baffle not mounted on inside
of door.

Mount air baffle.

Subsection "Unhooking air baffle"
on Page 28.
Convection revision panel not
mounted.

Mount convection revision panel.

Subsection "Cleaning convection
revision panel" on Page 29.
Cause Action
Door seal is missing or dam-
aged.

Notify a facility authorized to carry out
repairs.

Chapter "Repairs" on Page 33.
Cause Action
High ambient temperature.

Move the unit to a cooler location.
– or –
Have a refrigeration technician
change the refrigeration parameters
of the temperature regulator.
The evaporator is covered with
ice.

Defrost the unit.

Subsection "Defrosting the unit
manually" on Page 14.
Refrigeration unit failed or dam-
aged.

Notify a facility authorized to carry out
repairs.

Chapter "Repairs" on Page 33.