KARAT
®
180
GB
OPERATING MANUAL KARAT® 180
23
Rate of drilling progress
decreases .
Core bit segments polished .
Water pressure/water flow rate too
high .
The core is stuck in the core bit .
Maximum drilling depth reached .
Core bit defective .
Gearing defective .
The clutch is releasing prematurely
or slipping .
Sharpen the core bit on a sharpening
plate while water is flowing .
Use the feed lever to reduce the water
flow rate .
Remove the core .
Remove the core and use a core bit
extension .
Check the core bit for damage and
replace if necessary .
Have the machine repaired at a
service center .
Have the machine repaired at a
service center .
Motor cuts out .
The core bit has been jammed for
too long .
Electric power failure .
Too low power supply .
Electronics defective .
Free the core bit . Switch the motor off
and then on again .
Check the plug connections, electric
power supply and PRCD protective
switch .
Check power supply .
Too long/thin extension cord .
Too small aggregate .
Have the machine repaired at a
service center .
Water leakage at the water swivel
or gear housing .
Shaft seal defective .
Water pressure is too high .
Have the machine repaired at a
service center .
Reduce the water pressure .
REPLACEMENT PARTS
If – in spite of meticulous manufacturing and test-
ing processes – the device breaks down, have it
serviced by a B+BTec Service.
GUARANTEE
For this B+BTec appliance we grant a warranty in
accordance with the statutory/country-specific
provisions as from date of purchase (by evidence
of invoice or delivery note). Damage that has
occurred will be corrected either by replacement
or by repair.
Damage caused by improper handling is
excluded from the warranty.
Claims can be recognized only if the appliance
is presented in a not-disassembled manner to a
B+BTec branch office, your B+BTec field service
employee or a customer service office for power
tools authorized by B+BTec.
We reserve the right to make technical changes.
We accept no liability for printing errors.
ENVIRONMENTAL
PROTECTION
Do not dispose of this device in
household waste! According to Euro-
pean Directive 2012/19/EU on waste
electrical and electronic equipment
and its implementation in national
law, broken and unserviceable electric tools must
be collected separately and submitted to an envi-
ronmentally sound recycling facility. Ensure that
your used device is returned to your dealer or
obtain information about a local authorised col-
lection and disposal system. Ignoring this EU
directive can have potential effects on the envi-
ronment and your health!
Summary of Contents for KARAT 180 Series
Page 36: ...bbtectools com...
