3
11.1 Ambient conditions
15
12.
Disposal
15
13.
Distributor in the US/Contact in Canada for product
information and complaints
15
1.
Applicable to
►
For item-specific instructions for use and information on material
compatibility, see also the Aesculap Extranet at
www.extranet.bbraun.com
2.
Safe handling
CAUTION
Federal law restricts this device to sale by, or on order of a physician!
►
Remove the transport packaging and clean the new product, either
manually or mechanically, prior to its initial sterilization.
►
Prior to use, check that the product is in good working order.
►
To prevent damage caused by improper setup or operation, and in order
not to compromise warranty and manufacturer liability:
– Use the product only according to these instructions for use.
– Follow the safety information and maintenance instructions.
– Only combine Aesculap products with each other.
►
Ensure that the product and its accessories are operated and used only
by persons with the requisite training, knowledge, or experience.
►
Keep the instructions for use accessible for the user.
►
Only use handpieces and tools expressly approved for the HiLAN power
system.
3.
Product description
3.1
Components required for operation
When putting the HiLAN XS pneumatic motor into operation, the follow-
ing components are required
Designation
Special features
Art. no.
Compressed-air sup-
ply with a minimum
of 6 bar (0.6 MPa)
If compressed air is sup-
plied via a compressed-
gas cylinder, use a pres-
sure reducer
Pressure reducer:
e.g., GA099
Compressed-air tubes
Aesculap Dräger system
GA464 (3 m),
GA466 (5 m)
If needed, extension
tubes GA194 (3 m),
GA195 (5 m)
DIN connection
GA461 (3 m, with
diffuser)
GA463 (3 m, with-
out diffuser)
GA465 (5 m, with-
out diffuser)
If needed, extension
tube GA087 (5 m)
Motor tube
GA513 (3 m)
GA523 (2.3 m)
GA505 (5 m)
If needed, extension
tubes GA194 (3 m),
GA195 (5 m)
Foot control
GA521
HiLAN XS pneumatic
motor
Hi Line XS handpiece
Summary of Contents for Aesculap HiLAN GA519
Page 2: ...GA523 2 3 m GA464 3 m GA523 2 3 m ...
Page 3: ......