INSTRUCTION MANUAL
TagTemp
Temperature Data Logger
Technical changes reserved
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
0141 0315-84 22.06.2016
Fon +49 771 83160 | Fax +49 771 831650 | [email protected] | bb-sensors.com
8 / 14
To display the
configuration setup dialog
box
Stops any running
measurements
Press this button to download the
actual contents of the logger’s
memory
Press to view online the 10 last
logged values
7.3.
Configuring the logger
Make sure the communication interface is connected to the PC port selected. The interface must be constantly directed towards the
communication window on front part of the logger at a maximum distance of 0.5 m.
The logger must be first “woken up” by pressing once the
Start/Stop (S)
button on its front side.
After the serial port is selected, click the “
GO
” button:
The following
Parameters Configuration
dialog box is then displayed