INSTRUCTION MANUAL
TagTemp
Temperature Data Logger
Technical changes reserved
B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen
0141 0315-84 22.06.2016
Fon +49 771 83160 | Fax +49 771 831650 | [email protected] | bb-sensors.com
7 / 14
5.
Select “Search for the best driver in these locations” and
check
“Search
removable media”. Click “Next”. If installation files are not in a CD, check “Include
this location in the search” and show the file path.
6.
If a prompt warns you that it does not support Windows® XP or that signature
verification failed, click “
Continue anyway
”.
7.
The interface driver files will be copied to the PC and after a few seconds a
screen is displayed informing you that the software installation has been
concluded. Click “Finish”.
8.
In some situations, the steps described above may be repeated again. Follow the
same procedures.
In later uses of the interface, Windows® may require the driver installation again. In
this case, the same installation wizard will be displayed, and you will have to select the option “Install software automatically
(recommended), as the driver may already be in the computer.
Logchart-II
Software installation:
Insert the supplied CD-ROM in the CD-drive of the PCs/Laptop.
The software installlation wizzard will start automatically. If it does not, please run the
LC_II_Setup.exe
program
provided
from
your CD drive. To do so please follow the steps below:
From the start menu of Windows run Windows Explorer. Choose the CD drive
Double click on the icon
LC_II_Setup.exe
to run the setup
program.
Follw the steps described in the Setup wizzard
7.2
Running LogChart_II
When you open Logchart-II by double clicking on its icon the following main window is displayed
Next, select the serial port that the communication interface will use in the “
Port
” menu.
If using a serial port check which serial is available. Usually COM2 is free, once the mouse uses COM1. In the case of
Ir-Link3/USB
choose
USB port.
The chosen port will be chosen by default next times the LogChart II is initiated. When a valid port is selected, the
buttons showed below are highlighted.