![background image](http://html.mh-extra.com/html/b-b-sensors/hm-1150/hm-1150_instruction-manual_460619010.webp)
INSTRUCTION MANUAL
Technical changes reserved
B+B 0141 0315-117 September 2010
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon +49 771 83160 | Fax +49 771 831650 | [email protected] | bb-sensors.com
10 / 12
4. Specification
Range:
-50 to +1150°C
Resolution:
1°C
Accuracy:
Sensor::
<1% ±1 digit from -20 to +550°C and 920 to 1150°C, <1,5% ±1 digit from 550 to 920°C.
For more detailed values please refer to att. correction table.
NiCr-Ni, acc. to ½ DIN 43710 for plug-in operation (not included in scope of supply!)
Display:
approx. 13 mm high, 3½ digit LCD
Nominal temperature:
25°C (accuracy specified at this temperature)
Working temperature:
Atmospheric humidity:
0 to 45°C, please avoid quick temperature changes, if possible, otherwise a temperature
adjustment time of approx. 15 minutes has to be taken into account.
0 to 80 % r.F. (not condensing)
Power supply:
9V-battery type IEC 6F22 (included) as well as additional d.c. connector (internal pin Ø
1.9mm) for external 10-12V direct voltage supply. (suitable power supply: GNG10/3000)
Battery life time:
approx. 700 operating hours
Low battery warning::
„BAT“
displayed automatically in case of low battery
Dimensions of case:
approx. 142 x 71 x 26 mm (H x W x D), Impact-resistant ABS plastic housing, Front side
IP65, integrated pop-up clip for table top or suspended use.
Weight:
approx. 160g (cpl. device with battery)
EMV:
The device corresponds to the essential protection ratings established in the Regulations of
the Council for the Approximation of Legislation for the member coutries regarding
electromagnetic compatibility (89/336/EWG). Additional error: <1%