User Manual
Page 33
of 44
Dynamic Route
Click Advanced Setup > Routing > Dynamic Route in the left pane, the page
shown in the following figure appears.
The following table describes the parameters of this page.
IPv6 Static Route
Click Advanced Setup > Routing > IPv6 Static Route in the left pane, the
page shown in the following figure appears. The setup refers to Static route.
FIELD
DESCRIPTION
Active
Select
active
, the router communicates with other RIP-enabled devices.
Port
The router interface that uses RIP.
Version
Choose the interface version that receives RIP messages. You can choose
off,RIPv1, RIPv2-B, RIPv2-M,or Both.
Choose RIPV1 indicates the router receives and broadcasts RIP v1
messages.
Choose RIPv2-B, RIPv2-M indicates the router receives and
broadcasts RIP v2 messages.
Choose Both indicates the router receives and broadcasts RIP v1 and
RIP v2 messages.
Choose off indicates the router can’t receive and broadcasts RIP v1
and RIP v2 messages.
