![background image](http://html.mh-extra.com/html/aztech/vc2000/vc2000_user-manual_3043572009.webp)
User Manual
Page 9 of 20
Device Installation
Please read and follow the instructions written below carefully. You may also use the
diagrams provided for reference.
Installing batteries to the Main Body
1.
Unfasten the base plate’s screw using a screwdriver and open its base plate.
2.
Insert the battery correctly, and fasten the battery with the base plate using a screw driver.
3.
Connect the charging dock and the vacuum cleaner.
4.
Plug the charging dock’s power adapter to a power outlet.
NOTE: For FIRST use, charge the battery for 8 hours. Ensure to use the original
battery provided in the packaging box to avoid damage to your product.
Installing the Remote Control’s battery:
1.
Lift the clasp of the battery cover at the back of the remote control.
2.
Install two (2) AAA
alkaline batteries correctly
(pay attention to the correct
polarity
).
3.
Close the battery cover.
Installing the Virtual Wall’s Battery
1.
Open the base plate of virtual wall located underneath the device.
2.
Place the batteries correctly (observe the polarities of the batteries).
3.
Close the base plate.