![background image](http://html.mh-extra.com/html/aztech/vc2000/vc2000_user-manual_3043572012.webp)
User Manual
Page 12 of 20
How to Schedule Cleaning
1.
Schedule the "Day”
a)
Switch ON your device, the VC2000 will enter into the stand-by state.
b)
Press the SCHEDULE button to select the "Day " you want, then press the CHARGE
button twice to confirm (if the Day light LED turns ON, the setting is successful).
You can schedule the VC2000 to clean per day and up to seven times per
week.
2.
Schedule the "Hour" and "Minute"
a)
Press the SCHEDULE button continuously until the first figure on the time display
flashes.
b)
Select the appropriate Hour by pressing the CHARGE button.
c)
Press the SCHEDULE button continuously until the second figure on the time
display flashes.
d)
Press the CHARGE button to select the appropriate figure of Hour. You can
complete the scheduled Minute setting in the same way.
3.
Press CLEAN Button to save the setting of scheduled cleaning time.
Note: You must set the current time before setting a schedule
How does the Virtual Wall Work?
The Virtual Wall creates an invisible barrier that Aztech VC2000 will not cross. This invisible
barrier can be used to confine the VC2000 to a particular room or area and prevent it from
getting too close to electrical or computer cords, delicate objects on the floor, etc. it can be
set to block an opening up to seven feet long.
It is important to take note that the width of the Virtual Wall’s beam also increases as its
length increases, creating a cone-shaped area which the VC2000 cannot pass. The Virtual
Wall also creates a halo of protection around itself, preventing the cleaner from getting too
close to the virtual wall device.
*Turn on the virtual wall, and place it on the outside of the doorway you wish to block.