User Manual
Page 13 of 20
How to Mop?
The mop is only suitable for hard smooth floors. Please remove mop and mop plate when
using the VC2000 on the carpet.
Care and Maintenance
Before performing the maintenance of the VC2000, please ensure that the power switch is
OFF.
Cleaning the Dust Bin
If your VC2000’s dust bin is full, the suction power will be weakened. Please empty the dust
bin before and after every use.
To Empty the Dust Bin, kindly follow the instructions below:
1.
Press the dust bin button to pop up the dust bin. (refer to Pic 1)
2.
Hold the dust bin with both hands, use thumbs to press each side button and stretch
other fingers, the dust bin will be open completely. Use the cleaning brush to clean
the dust bin and HEPA Filter.
3.
Close the bottom board of dust bin.
4.
Install the dust bin to the VC2000.