3
Easy Start
ADSL Ethernet Modem Overview
Front View
Ê
ETH/ACT
Lights up
when the Ethernet Network cable is properly
connected from the Modem to the Ethernet Network Card.
Blinks
when the ADSL is transmitting/receiving data.
Ë
DSL
Lights up
when the ADSL connection is established.
Blinks
when modem is trying to establish an ADSL
connection with your ADSL Service Provider.
Ì
POWER
Lights up when power is supplied to the Modem.
4
To activate the reset function:
- Ensure that your Modem is
powered on
.
- Use a paper clip or a pencil tip to depress the reset button and release. At this point, the DSL
indicator will be
off, followed by the ETH/ACT
indicator. The reset is in progress.
- When the
DSL
indicator starts blinking, it means that the reset process is completed. The
default settings are now restored.
- ADSL line is established once the
DSL
indicator lights up.
Ê
LINE
Telephone jack (RJ-11) to connect to your Telephone Wall
Socket (ADSL line).
Ë
RESET
To reset your Modem to factory default settings. (All
customised settings that you have saved will be lost!)
Please refer to the below footer
4
on how to activate the
reset function.
Ì
ETHERNET
10 / 100 Base-T Ethernet jack (RJ-45) to connect to your
Ethernet Network card.
Í
DC IN
To connect to your Power Outlet via the Power Adapter
that comes with your package.
Rear View
Ë
Ì
Ê
Ê
Ë
Ì
Í