background image

Supplied By www.heating spares.co  Tel. 0161 620 6677

NOTE:  Over 50% of all service calls made are

found to have no appliance fault.

What to do in the event of an appliance
fault or breakdown:

Step 1: Always contact your installer in the first instance,

who must thoroughly check all his work PRIOR to

requesting a service visit from Trianco.

Step 2: If your appliance has developed an in-guarantee

fault your installer should contact Trianco
for assistance.

What happens if my installer/engineer is
unavailable?

Step 3: Contact Trianco.  We will provide you with the 

name and telephone number of our Service 
Agent.  However, a charge may apply if the fault
is not covered by the appliance guarantee
(payment will be requested on site by our
independent Service Agent).

PLEASE NOTE:

UNAUTHORISED INVOICES FOR ATTENDANCE AND
REPAIR WORK CARRIED OUT ON THIS APPLIANCE
BY ANY THIRD PARTY WILL NOT BE ACCEPTED BY
TRIANCO.

A step by step guide to reporting a fault
with your appliance

A qualified field SERVICE ENGINEER is available to
attend a breakdown or manufacturing fault occurring
whilst the appliance is under guarantee.

The appliance must be made available for service during
normal working hours, Monday to Friday (no weekend
work or bank holidays accepted).

A charge will be made where:

Our Field Service Engineer finds no fault with the
appliance 

or

The cause of a breakdown is due to other parts of the
plumbing/heating system or with equipment not 
supplied by Trianco.

or 

Where the appliance falls outside the guarantee 
period (see terms and conditions enclosed).

or

The appliance has not been correctly installed,
as recommended (see installation, operating  and 
servicing instructions.)

TRIANCO 

CUSTOMER AFTER SALES SERVICE INFORMATION

SERVICE CENTRE AND TECHNICAL SUPPORT

Tel: 0114 257 2300  Fax: 0114 257 2338

Hours of Business Monday to Thursday 8.30am - 4.45pm

Friday 8.30am - 2.30pm

1

            

Summary of Contents for EB 897 01





























Reviews: