PROSCRUB OWNER’S MANUAL PAGE
4
08-2017
IMPORTANT SAFETY INFORMAITION
The
20” ProScrub automatic scrubber is designed to scrub floors in an indoor environment and is not
recommended for any other use. Call Aztec 800-331-1423 for additional application questions.
Never use flammable or explosive cleaning solutions such as gasoline,
kerosene, solvents, thinners, etc. in the solution tank in an attempt to
remove grease, oil, tar, etc. from floors. Never operate scrubber where
flammable liquids or gases are present.
Keep hands and feet clear of moving parts to avoid injury.
Extreme caution should be used whenever a ramp is used to load or unload this
autoscrubber. Do not attempt to make turns on the ramp. Personal injury or damage to machine or
property may occur.
Do not attempt to ride on or otherwise attach any type of rider platform to this
scrubber. Injury and property damage may occur.
0
Safety is a full-time, every day job.
Never let an untrained or irresponsible person
operate the machine. They may hurt themselves and/or damage the floor or other property.
Do not leave this machine unattended while the machine is ON. Damage to floor
surface or other property may occur.
Never operate this autoscrubber with the dash panel removed. Always operate
this autoscrubber with the brush cover, battery cover, and all side panels secured and in the correct
position. Personal injury or damage to machine or property may occur.
Remove all loose objects from floor before operating. Loose objects may become
dangerous projectiles when they come into contact with revolving brushes/pads.
Keep autoscrubber moving along floor to avoid burning or damage to floor surface.
