PROSCRUB OWNER’S MANUAL PAGE
12
08-2017
MAINTENANCE SCHEDULE
Machine should only be tipped back for service if properly turned OFF, in a
safe environment and positioned on a flat surface. Do not tilt machine on its side; damage can occur to
the machine, furniture, buildings and/or personal injury. This is a two-person job.
Do not tilt machine on its side; damage can occur to the machine, furniture,
buildings and/or personal injury. Machine should only be tipped back to transport or for service, if
properly turned OFF, in a safe environment and positioned on a flat surface. This is a two-person job.
Before attempting any maintenance or repair on the autoscrubber, make sure that
it is on a level surface, that all switches are on the “OFF” position, and disconnect batteries and/or battery
charger to prevent any accidental electrical problems, damage or injury.
To avoid damage to floors, never use overly soiled pads/brushes when scrubbing
a floor.
Store squeegee in the “UP” position to prevent equipment damage.
Clean machine, tanks and metal surfaces with nonabrasive, non-solvent cleanser
to prevent damage to tanks and powder coat finish.
The manufacturer’s warranty will be voided if the machine is not maintained in
accordance with the recommended maintenance instructions within this Owner’s Manual
recommended maintenance procedures. Failure to do so may cause damage to the machine,
equipment, furniture, buildings, and/or personal injury.
All maintenance must be performed by authorized personnel.
Failure to follow the maintenance schedule could result in non-warrantable failures.
