2ª 10028 – E 03 - 2016
8
A5.
Beaters
This mechanism mixes the product with the hot water from the boiler.
D1. Beater motor
D2. Beater fins
D3. Beater assembly
D4. Vapour extractor
D5. Holding screw
D6. Beater holding pivots
D7. Motor holding tabs
The movement of the beater is carried out by a motor of the following technical characteristics:
Supply voltage
34 Vdc.
Speed
15,000 rpm
The beater assembly can be removed from the machine by turning it to free it from the holding
pivots. To remove the motor, remove the holding screw and twist the motor to the right to free
it from the holding tabs.
WARNING! When mounting the wiper motor (04101650) and wiper base
assembly (11037941 Beige / Grey 11037931 / Green 41221621) the grey
part which is inside the base must be pushed toward the beater motor.
The contact between this grey part and the wiper base assembly must be avoided. If these two
bodies remain in contact or very close to each other, when the motor runs, friction between
the two parts causes them to fuse together, leaving the beater unusable. For this task,
Azkoyen has available in its catalogue, the appropriate tool which is part number 10040130.
