Azkoyen AZKOY GROUP VITRO S5, User Manual

Page: 19 / 33

User Manual
- 19 -
CHAPTER 4. CONFIGURATION AND PROGRAMMING
4.1.- What is programming?
The machine is cable of performing a series of functions that you can
configure. The programming is the actions that you establish in order to
determine how the machine will operate in certain functions.
The machine is cable of performing a series of functions that you can
configure. The programming is the actions that you establish in order to
determine how the machine will operate in certain functions
.
4.2.- Programming control unit
The keys of the programming control unit can be activated in two ways: by
simply pressing thekey once and by holding the key down for more than 3 seconds.
Operation of the programming control unit in the normal sales mode.
SINGLE PRESS OF THE KEY KEY HELD
Key A One free sale Enters into the hierarchical programming
menu.
Key B Blender wash Shows the temp. on the display
Key C
Enters into the basic programming
menu
Runs a function directly.
Key D Allows external programming Programming of the basic menu functions
The operation of the programming control unit in accessing the functions
Press the C key of the programming keypad. If there have been incidents during service
(breakdowns, empty hoppers, etc.), they will appear on-screen. Press the A key again to
access the Functions menu (if there have been no incidents, pressing the C key once will
suffice). The first function included in the function menus will appear.
SIMPLE PRESS
Key A Function goes forward
Key B Function goes backward
Key C Exits the programming
Key D Accesses the function that is displayed at that moment