manualshive.com logo in svg

Azimuth 3000 Series, Installation, Use And Maintenance Manual

Share
Download
Azimuth 3000 Series Installation, Use And Maintenance Manual Download Page 41

6 MAINTENANCE

 
6.1 GENERAL PRECAUTIONS
 
6.1.1 MACHINE DISCONNECTION
 

Before performing any maintenance or repair operations, disconnect the machine from all the 
power sources. Turn the main power switch to 

'O'-OFF

. 

6.1.2 SPECIAL PRECAUTIONS
 

When performing maintenance or repair operations, observe the following: 
- Before starting work, post a sign "MACHINE UNDER MAINTENANCE" in a well visible

  

position. 

- Do not use solvents or flammable materials. 
- Take care not to pollute the environment with cooling lubricants. 
- Use suitable equipment to access the upper parts of the machine. 
- Do not climb onto machine components or guards, as they have not been designed to

  

support the weight of a person. 

- After completing the maintenance operations, refit and properly secure all the protection

  

devices and safety guards that have been removed or opened. 

6.1.3 CLEANING
 

Periodically clean the safety guards, particularly the transparent material of the casing, using
a damp cloth. 

6.2 SCHEDULED MAINTENANCE
 

This paragraph describes the operations to be carried out periodically in order to ensure
proper functioning of the machine.

 

IT IS ESSENTIAL TO SCRUPULOUSLY

 

OBSERVE THE MAINTENANCE 

OPERATIONS DESCRIBED BELOW IN ORDER TO MAKE THE MACHINE 
MORE EFFICIENT AND ENSURE A 
LONGER LIFE. 

IF MACHINE MAINTENANCE IS NOT CARRIED OUT IN COMPLIANCE WITH 

THE INSTRUCTIONS PROVIDED, THE MANUFATURER IS RELIEVED OF ALL 

RESPONSIBILITY FOR MALFUNCTIONING OF THE MACHINE. 

41

Packaging Equipment

Summary of Contents for 3000 Series
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands