Mounting the ramps (optional)
The ramp can be mounted on three sides. To mount the ramp, proceed as follows (Fig. 4.8):
a) tighten the screw
(1)
in the base and push down on the ramp to fit the slot;
b) adjust screw
(3)
to make the ramp flush with the base;
c) adjust the distance
(X)
of the ramp from
the turntable by tightening or loosening screws
(2)
,
the distance must be adjusted to 2 ÷ 5 mm (max);
d) tighten the screw
(1)
;
e) tighten the lock nuts.
29
Packaging Equipment
