Azbil SVX100, User Manual

Page: 5 / 84

iii
Unpacking
Handle with care to prevent damage. Check that the following items are included:
„
Smart Valve Positioner for Rotary Valve model SVX100, SVX102
„
Feedback lever
„
Two hex socket bolts (only for stroke lever type)
„
Hex bolt and spring washer (only for fork lever type)
„
Hex wrench (for feedback lever - only for stroke lever type)
„
Mounting kit (option)
„
Manual (Option)
Verifying the specifications
The Smart Valve Positioner for Rotary Valve specifications are written on the name plate
on the body of the positioner itself. Compare these specifications to those in the appendix,
and verify that the Smart Valve Positioner for Rotary Valve matches your order. In
particular, be sure to check the following items.
„
Tag number (TAG NO.)
„
Model number (MODEL)
„
Factory number (PROD.)
„
Input current range (INPUT)
„
Air supply pressure (SUPPLY)
Inquiries
If you have any questions about the specifications, please contact the office listed at
the back of this user's manual. Have the model number (MODEL) and factory number
(PROD.) number ready when you call in your question.
Storage
Ideally, the SVX should be stored in the original packaging. However, if the original
packaging is not available, store the SVX indoors at normal temperature (25°C {77°F})
and humidity (60% RH) in a place free from vibration and shock and not exposed to rain
or water. If you are storing the SVX after it has been used, clean the SVX and then firmly
tighten the terminal box cover and seal the wiring, piping connections and bleed hole
in the pilot cover using the Azbil Corporation-supplied caps or tape to prevent entry of
moisture.