34
Chapter 5. APPLICATION OPERATION
Note) "Normal" refers to the volumetric flow rate (m
3
/h) after converting to
0°C,101.325kPa (1 atmosphere).
Handling Precautions
*1
: Be certain to set a flow rate that is less than the display upper limit.
Alarm detection will not operate if flow rate is set above the display
upper limit.
*2
: If "lower limit alarm1" has been selected in function setup
C-02
,
alarm detection will not operate when the flow rate is less than the
lower limit of the measurement range, even if the flow rate is below
the lower limit alarm value.
z
Instantaneous flow rate upper limit alarm operation
ON
OFF
Hysteresis
Instantaneous flow rate
upper limit alarm value
Instantaneous flow rate
z
Instantaneous flow rate lower limit alarm operation
ON
OFF
Hysteresis
Instantaneous flow rate
lower limit alarm value
Instantaneous flow rate
