19
Chapter 3. MOUNTING AND WIRING
Wiring
CAUTION
Prevent the load connected to the output terminal from exceeding the rating
indicated in the specifications. Failure to do so might cause damage.
Be sure to check that the wiring is correct before you turn the power ON.
Incorrect wiring might cause damage or malfunction.
The following table describes the meaning of symbols indicated on the terminal layout label on
the CMG:
Symbol
Meaning
Direct current
z
Removing the operation panel/display
Required tool: Phillips screwdriver
(1) Loosen the four screws on the operation panel/display using the
Phillips screwdriver.
(2) Gently lift up the operation panel/display, and disconnect its
power lead connectors.
