Azbil HTY7043T1P00 Specifications & Instructions Download Page 4

Page: 4 / 20

AB-7050

Part Numbers of Optional Items

Mount Neosensor with the following optional items (sold separately). Order necessary items.

Item

Part number/Model number

Wall-direct mounting kit

Part No. 83165803-001

Thermoplate mounting kit

Part No. 83165803-011

Dedicated mounting kit

Multi-Thermocase mounting kit Part No. 83165803-021
Thermoplate for individual room
control

Models QY1100C and QY1100D
(with rotary switch)
Part No. DY2000A1022

For mounting one Neosensor, lengthwise

Part No. DY2000A1023

For mounting one Neosensor, crosswise

Part No. DY2000A2023

For mounting two Neosensor in 94mm (H) x 192mm (W)
outlet box, crosswise

Part No. DY2000A2024

For mounting two Neosensor in 106mm (H) x 198mm
(W) outlet box, crosswise

Thermoplate

Part No. DY2000A3022

For mounting three Neosensor, crosswise

Part No. DY2000A1021

For mounting one Neosensor, square

Part No. DY2000A2021

For mounting two Neosensor, crosswise

Thermoplate for open wiring
* Thermoplate for open wiring

is used for open wiring
installation.

Part No. DY2000A3021

For mounting three Neosensor, crosswise

Auxiliary device

Multi-Thermocase Model

TY1100Z

LAN cable

Part No. DY7210

For modular connection type Neosensor
* Use Part No. DY7210 or the cable that meets the

following:
TIA/EIA-568 Category 3 or over (

⌀0.5 x 4 pairs)

* For the wiring length, refer to the

Specifications/Instructions document of the controller

in connection with Neosensor.

TIA/EIA: Telecommunications Industry Association/Electronic Industries Association

Dedicated mounting kits for each mounting method

Mounting method

Mounting kit

Contents

Mounting directly on a
wall

Mounting onto
Thermoplate for open
wiring

Wall-direct mounting kit
(Part No. 83165803-001)

Mounting onto
Thermoplate

Thermoplate mounting kit
(Part No. 83165803-011)

Mounting in
Multi-Thermocase

Multi-Thermocase mounting kit
(Part No. 83165803-021)

One flat-head machine
screw (M3

16)

Main unit

Mounting plate

Two pan-head machine screw (M4

Man unit

Two tapping screws (M2.6

Main unit

66.7 mm

Mounting screws are supplied with
the Multi-Thermocase (optional).

Summary of Contents for HTY7043T1P00





















Search results

Summary of Contents for HTY7043T1P00

Reviews:

Related manuals for HTY7043T1P00

Brands by name

Popular brands

Azbil HTY7043T1P00, Specifications & Instructions

Search results

Summary of Contents for HTY7043T1P00

Reviews:

Related manuals for HTY7043T1P00

Brands by name

Popular brands