AB-7050
11
Installation steps: Neosensor directly on a wall with Wall-direct mounting kit
1) Attach the mounting plate of the Wall-direct mounting kit to the outlet box cover (JIS C8340:1999 Boxes and box covers for
rigid metal conduits (mounting dimension: 66.7 mm)) on the mounting surface.
2) Attach the main unit of the Wall-direct mounting kit to the mounting plate. (See Fig. 11.)
3) Connect the lead wires of Neosensor and the wires from the load. (See Figs. 20 and 21.)
Note:
The number of the lead wires differs depending on the models. Note that the Pt100 temperature sensor model with modular connection
has a modular jack instead of lead wires. (Model TY7043Z0P01(-1))
4) Remove the cover of Neosensor as shown in Fig. 14.
5) Set the depth change levers on the bilateral sides of the Neosensor main unit to the upper position (indicated with "L" shown
in Fig. 17).
6) Mount the main unit of Neosensor on the main unit of the Wall-direct mounting kit with four mounting screws (M3
×
16)
supplied with Neosensor.
7) Attach the cover back to the Neosensor main unit and complete the installation. (See Fig. 14.)
Figure 9. Installation: Neosensor with Wall-direct mounting kit
66.7 mm
Wires
from the load
Mounting plate
of Wall-direct mounting kit
2 pan-head machine screws (M4
×
8)
of Wall-direct mounting kit
Main unit
of Wall-direct mounting kit
Lead wires of
Neosensor
1 flat-head machine screw (M3
×
16)
of Wall-direct mounting kit
Main unit of Neosensor
4 flat-head machine screws
(M3
×
16) of Neosensor
Cover of Neosensor
Neosensor
Wall-direct mounting kit
(optional)
Mounting box cover (JIS C8340
with 66.7 mm mounting dimension,
commercially available)
