3
AB-7333
WARNING
Electric shock
Install this product in a location out of
reach of unauthorized people. (e.g. Inside
of the control panel with a lock)
Failure to do so might cause electric shock.
Ground
Ground this product with ground resistance
of less than 100 Ω.
Improper grounding may cause electric
shock or malfunction.
Electric shock
Before wiring or maintenance, turn off the
power to this product.
Failure to do so may result in electric shock
or device failure.
Prohibition
Do not insert conductive objects through
product ventilation holes.
Doing so may cause electric shock.
Electric shock
Do not touch electrically charged parts.
Doing so may cause electric shock.
CAUTION
General
Take anti-lightning surge measures based
on regional and building characteristics.
Lightning may cause fire or critical damage
to this product if protective measures are
not taken.
General
Keep the products in package for storage.
Failure to do so may damage or stain the
products.
General
Do not drop this product.
Doing so may cause an injury or may
damage the device.
General
Install, wire, and use this product under the
conditions specified by this manual.
Failure to do so may cause fire or device
failure.
General
Take anti-noise measures if this product
is installed in a location near source of
electric noise.
Failure to do so may cause malfunction or
device failure.
General
Installation and wiring must be performed
by personnel qualified to do instrumenta
-
tion and electrical work.
Mistakes in installation or wiring may cause
fire or electric shock.
General
All wiring must comply with applicable
codes and ordinances.
Otherwise there is a danger of fire.
CAUTION
General
Strip the insulation from cables as speci-
fied in this manual.
If the length of exposed wire is longer than
specified, it may cause electric shock or
short circuit between adjacent terminals.
If it is too short, it may not make proper
contact.
General
Tighten the terminal screws with the spec-
ified torque.
Insufficient tightening of the terminal
screws may cause fire or overheating.
Prohibition
Do not use unused/spare terminals on this
product as relay terminals.
Doing so may cause device failure.
Prohibition
Do not block the ventilation holes of this
product.
Doing so may cause device failure.
Prohibition
Do not allow wire clippings, metal
shavings, and other refuse to enter into the
product.
Doing so may cause fire or product
damage.
Disassemble
Do not disassemble this product.
Doing so may cause device failure.
General
Before cleaning the product or retorquing
the terminal screws, turn off the power to
the product.
Failure to do so may cause electric shock,
device failure, or malfunction.
General
Before touching this product, remove any
static electrical charge from your body.
Otherwise your static electricity may
damage some components of the product.
Static electrical charge can be removed by
touching the grounded metal.
Prohibition
When removing the fan, do not insert
fingers into the product.
Doing so may damage the internal
components.
General
Dispose of used lithium batteries in accor-
dance with local regulations. Do not throw
them in the fire or dispose of them with
ordinary garbage.
Doing so may cause the batteries to burst
or ignite.
