18
AB-7333
z
How to Remove and Attach the Fan Assembly
Remove the fan while this product is operating.
CAUTION
General
Before touching this product, be sure to
remove any static electrical charge from
your body.
Otherwise your static electricity may
damage some components of the product.
Static electrical charge can be removed by
touching the grounded metal.
Prohibition
When removing the fan, be sure not to
insert fingers into the product.
Doing so may damage the internal
components.
(1) Open the door at the top of the device.
(2) Remove the fan cover.
Pull the fan cover toward you while pressing down
on the two triangles on the top of the fan cover.
Door
Open
Fan cover
Pull out
Pull out
(3) Pull the connector out of the fan assembly.
(4) Check that the fan has stopped.
(5) Lift and remove the fan assembly.
(6) Clean the fan assembly using a small vacuum
cleaner or other tool.
(7) Attach the fan assembly by performing the opera-
tion described in step (5) in reverse.
(8) Connect the fan assembly connector.
(9) Place the fan cover over the fan and push it in until it
is in place.
(10) Close the door at the top front of the device.
(11) After attaching the fan, check that air is vented from
the fan cover and that the fan does not generate
abnormal noise.
Fan assembly
Connector
Lift
