2
．
Connect Ethernet cable terminal to MSR2000 Ethernet interface.
3
．
Plug the Ethernet cable emphatically into the MSR2000 Ethernet interface,
and fasten the connection by circling the Ethernet terminal to the right
direction.
4
．
Airproof the connection by insulating tape and PVC insulating tape.
8 Installation of power cable
MSR2000 use 110-220V
AC as power, the power interface is on the left and upper
position of MSR2000. The cabling of antenna cable is introduced in chapter 2.3. The
installation of power cable is the last step of installation.
Tools:
Diagonal Pliers
，
paper knife
The procedure of power cable installation:
1
．
Put the power terminal to
MSR2000 power interface
quite well;
2
．
Plug the terminal of power cable emphatically and fasten
the connection by circling the power terminal to right
direction;