The procedure of lightning protector installation is as:
1
．
Connect the lightning protector to radio port
of MSR2000;
2
．
Fasten the lightning protector by Spanner;
3
．
Unpack the copper ring of grounding.
4
．
Put the naked side of grounding wire into
copper ring and pressed well by
Crimping
Pliers;
5
．
Connect the grounding copper ring with
lightning protector and fasten it by Cross
Screwdriver;
6
．
Connect the another side of grounding wire
with grounding bar;
7
．
Daub butter on both side of grounding wire;
6 Installation of Feeder
Feeder is used to connect antenna with
MSR2000. The feeder must be as short as
possible to get minimum loss of signal
strength. If long feeder must to be used,