thicker feeder is recommended.
The typical pass loss of 100 meters is listed in below table:
Feeder type
Cable loss for 2.4GHz
(dB/100m)
Cable loss for 5.8GHz
(dB/dB/100m)
3/8”
18.8
31.7
1/2”
12.8
21.4
7D
25.7
42.6
8D
24.8
41.3
Tools needed for feeder installation: adjustable Spanner, paper knife,
Diagonal
Pliers.
The procedure of feeder installation is as:
1
．
Put feeder interface close to antenna connector very well
and slightly fasten the connection by circling the feeder
connector;
2
．
Fasten the connector by Spanner;
3
．
Cabling the feeder following the pole, and be careful of the beauty of cabling,
and without any sharp band of the cable.
The radius of cable bend should less than following figures of different types
Cable type
Cable Bending Radius (mm)
3/8”
95
1/2”
125
7D
60
8D
75
4
．
connect another connector to lightning protector;