Section 3 – 5
Azalea Aviation Copyright 2014
Rear Seal Installation
Apply Grey RTV (or equivalent) to out edge of seal and to inner edge of housing.
Using an appropriate tool (such as a large washer and socket) press the Seal down
into the housing until metal ring is flush with the housing lip. A new seal may have
to be carefully trimmed around the outside edge to fit inside the stator ring. (Fig 5)
Apply Lithium Grease to the inside of seal. This will be where the alternator puck
rides.
Fig. 5. - Rear Housing rear seal installed
The Accessory Housing now is ready for installation onto the Case.
Notes: If you choose to install the High Volume Oil pump kit be sure to follow the
instructions included in the kit. The use of a High Volume Oil pump is not
detrimental to the engine if installed correctly.
