Section 8 - 2
Azalea Aviation Copyright 2014
Apply cam grease to the cam “flat” surface of the lifters. (Fig 2) Oil the surface of
lifters and inside of the lifter bores. You can put oil on your index finger and wipe
the inside of the lifter bores. Slide the lifters into lifter bores and seat against the
camshaft. (Fig 3) (do not “prime” the lifter) The lifters are inserted with the “flat”
against the camshaft. Apply lithium grease to the pushrod tube sealing surface of
the lifter bores. Apply antiseize to the threads of the cylinder head studs. (Fig 4)
Fig. 2 – Cam lube on lifters – ready to oil
