background image

                   150-7000-001

 

15

Color Adjustment Menu

  

Auto Color

 

 

  
•  Press the SELECT button to run the Auto Color Set-up. Note screen flicker
•  A new dialog box pops up, with highlighted Happy and Sad Faces
•  Press the SELECT button to choose the Happy Face if present Auto Color is accept-

able or using LEFT button, choose the Sad Face if unacceptable, and

•  Press the SELECT button to save the changes (or not save if Sad Face was chosen) 

and Exit.

  

Standard Color Set-up

• Press the SELECT button to allow the OSD to automatically set Standard Color
•  A new dialog box pops up with highlighted Happy and Sad Faces
• Press the SELECT button to choose the Happy Face if present Auto Color is accept-

able or using LEFT button, choose the Sad Face if unacceptable, and

•  Press the SELECT button to save the changes (or not save if Sad Face was chosen) 

and Exit.

  

RGB Color Temperature Settings (Color Adjustments)

• Press the SELECT button to go to the RGB (Red, Green Blue) Color Temperature 
  Settings Menu
• Use the RIGHT or LEFT button to select one of the five Temperature 
  settings
•  Press the SELECT button to save the changes and Exit or Exit without making 

changes.

  

RGB Color Skin Tone Adjustment

• Best accomplished if viewing a screen shot with skin tone prior to adjusting
• Use the RIGHT or LEFT button to adjust the Color Skin Tone
•  Press the SELECT button to save the changes and Exit or Exit without making 

changes.

15

Summary of Contents for IP67 SERIES































Reviews: