GB
GENERAL SAFETY WARNINGS
The machine shall always be used in accordance with the manufacturer’s instructions laid down in
the instruction handbook.
The manufacturer will not be liable in cases of inappropriate use or modifications of the appliance.
Also, follow the safety advice, the installation and operation manual and also to the valid accident
prevention regulations.
Do not use the machine if you are tired or distracted or your reactions are impaired due to the
consumption of alcohol or medication. Inattention can result in serious injuries.
If you use the petrol chainsaw for lengthy periods of time, you may suffer circulation problems
caused by vibrations (white finger disease) and noise.
It is not possible to provide precise details on the duration of use in each case since it may differ
from person to person. The following factors may effect this phenomenon: Circulation problems
in the hands of the user, low outdoor temperatures and lengthy periods of use. We therefore
recommend that you wear warm work gloves / ear protector and take regular breaks.
The lubrication oil mist, exhaust gases and saw dust will be created during working, to reduce your
exposure to them: work in a well ventilated area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter out microscopic particles and mist.
Appliances with incorrect or missing parts or without a security case are not to be operated. The
service center provides you with information concerning replacement parts.
Training
a)
Read the instruction carefully. Be familiar with the controls and proper use of the equipment.
b)
Never allow children or people unfamiliar with these instructions to use the machine. Local
regulations can restrict the age of the operator.
c)
Never work while people, especially children, or pets are nearby.
d)
Keep in mind that the operator or user is responsible for accidents or hazards occurring to
other people or their property.
e)
Major repair work shall be carried out only by specifically trained personnel.
Preparation
a)
WARNING-Petrol is highly flammable:
•
store fuel in containers specifically designed for this purpose;
•
refuel outdoors only and do not smoke while refueling;
•
add fuel before starting the engine. Never remove the cap of fuel tank or add petrol while
the engine is running or when the engine is hot;
•
if petrol is spilled, do not attempt to start the engine but move the machine away from
the area of spillage and avoid creating any source of ignition until petrol vapours have
dissipated;
•
replace all fuel tank and container caps securely.
b)
Replace faulty silencers;
c)
Before using, always visually inspect to see that the tools are not worn or damaged. Replace
worn or damaged elements and bolts in sets to preserve balance.
d)
Do not smoke near the machine.
e)
Do not wear loose clothing, jewellery, or similar items that could be caught in the starter or
other moving parts.
f)
Never put any items into the ventilation openings. Non-observance may lead to injury, or
damage to the machine.
Operation
a)
Do not operate the engine in a confined space where dangerous carbon monoxide fumes can
collect
b)
Keep the machine free of oil, dirt and other impurities.
c)
Please always place the appliance on even and stable surfaces.
d)
Never operate the appliance inside buildings or in an environment without proper ventilation.
Pay attention to air flow and temperature.
e)
Do not operate or store the appliance in wet or humid surroundings.
f)
Ensure the sound absorber and air filter work properly. These parts serve as flame protection
in case of misfire.
g)
To avoid possible burn injuries, do not touch the exhaust system or other parts that become
hot during operation. Pay attention to the warnings on the machine.
h)
The engine must not be operated with excessive rotary speed. The operation of the engine with
excessive rotary speed raises the risk of injury. Parts which affect the rotary speed must not
be altered or replaced.
i)
Regularly check for leakage or traces of abrasion in the fuel system, such as porous pipes,
loose or missing clamps and damage to the tank or tank cap. Before use all defects must be
repaired.
j)
Work only in daylight or in good artificial light.
k)
Never pick up or carry a machine while the engine is running
l)
Stop the engine:
•
whenever you leave the machine
•
before refueling
m)
Before checking or adjusting the machine, the ignition plug and the ignition wire respectively
must be removed to prevent accidental starting.
Maintenance and storage
a)
Keep all nuts and screws tight to be sure the equipment is in safe working condition.
b)
Never store the equipment with petrol in the tank inside a building where fumes can reach an
open flame or spark.
c)
Allow the engine to cool before storing in any enclosure.
d)
To reduce the fire hazard, keep the engine, silencer and petrol storage area free of vegetative
material and excessive grease.
e)
Replace worn or damaged parts for safety.
134 135
