AXXIV 15S14 User Manual Download Page 97

Page: 97 / 272

Power Management

Configuring the Power Buttons 3 - 13

Ctrl + Alt + Delete Key Combination

You can use the

CTRL + ALT + DEL

key combination from almost any of the

Win-

dows 10

interfaces/Apps to bring up a full-screen displaying

Lock

Switch User

Sign out, Change a password

and

Task Manager

options. If you click the

Power

icon in the lower right corner of the screen a power management option menu ap-
pears to display

Sleep

Shut down

, and

Restart

To fully control all the power options (including Hibernate mode) go to the

Power

Options

control panel and configure the power button, sleep button and lid to per-

form the function selected.

Figure 3 - 8

Ctrl + Alt + Delete

Menu

Summary of Contents for 15S14

















































































































































































































































































Search results

Summary of Contents for 15S14

Reviews:

AXXIV 15S14, User Manual, Page: 97 / 272

Search results

Summary of Contents for 15S14

Reviews: