manualshive.com logo in svg

AXXIV 15S14, User Manual, Page: 131 / 272

Share
Download
AXXIV 15S14 User Manual Download Page 131

BIOS Utilities

Advanced Menu 5 - 11

5

SATA Mode (Advanced Menu)

The SATA (Serial ATA) controller operates in 

AHCI

 (Advanced Host Controller

Interface) mode. Install the 

Intel Rapid Storage Technology

 driver to support your

drive in AHCI mode (see 

“Intel® Rapid Storage Technology” on page 6 - 18

).

Boot Logo (Advanced Menu)

Use this menu item to enable/disable the 

Boot Logo

 screen at system startup. If you

disable the 

Boot Logo

 you will not see the 

F2 Enter Setup

 or 

F7 Boot Options

prompts on the screen, however you can still press these keys, while the boot screen
is displayed, to perform the Enter Setup or Boot Option functions.

Power On Boot Beep (Advanced Menu)

Use this menu item to enable/disable the beep as the computer starts up.

Battery Low Alarm Beep

 

(Advanced Menu)

Use this menu item to enable/disable the battery low alarm beep.

Summary of Contents for 15S14

















































































































































































































































































Reviews:

No comments