manualshive.com logo in svg

AXXIV 15S14, User Manual, Page: 126 / 272

Share
Download
AXXIV 15S14 User Manual Download Page 126

BIOS Utilities

5 - 6 Main  Menu

5

SATA Port # (Main Menu)

Pressing 

Enter 

opens the sub-menu to show the configuration of a optical Device/

HDD on the computer’s SATA Ports.

OffBoard SATA/NVme Controller Configuration (Main Menu)

Pressing 

Enter 

opens the sub-menu to show the configuration of any devices on the

off board SATA/NVme Controller if applicable.

CPU/ ME FW Version / System/ Extended Memory: (Main Menu)

This item contains information on the CPU type and system memory, and is not user
configurable. The system will auto detect the amount of memory installed.

MB Series / BIOS Revision / KBC/EC firmware Revision / Mac Address (Main
Menu)

This item contains information on the BIOS version etc., and is not user configu-
rable.

Docking Station 

Hard Disk Drives

Note that hard disk
drives installed in the
docking station will be
displayed as external
HDDs in the BIOS.

Summary of Contents for 15S14

















































































































































































































































































Reviews:

No comments