manualshive.com logo in svg

AXXIV 15S14, User Manual, Page: 202 / 272

Share
Download
AXXIV 15S14 User Manual Download Page 202

Control Center

B - 6 Control Center

B

Desktop Background (System Program) 

Clicking the 

Desktop Background

 button 

will allow you to change the desktop background picture.

Backlight Keyboard (Device) 

Click the numbers

 under the Backlight Keyboard icon to 

adjust the brightness of the keyboard backlight LED. 

TouchPad/PC Camera (Device) 

Click either of these buttons to toggle the TouchPad or camera module’s power status. The icon will appear
dimmed when it is off

. 

Note that the power status of the camera module is also effected by the 

Power Mode

selected (see 

Table B - 1, on page B - 2

).

Docking (Device) 

 

/

 

Click the 

Docking

 (Enable/Disable) button to prepare the system for docking/undocking.

Caps Lock/Scroll Lock/ Number Lock/Airplane Mode

Click the button

 

to toggle the appropriate lock mode and Airplane Mode.

Summary of Contents for 15S14

















































































































































































































































































Reviews:

No comments