manualshive.com logo in svg

AXXIV 15S14, User Manual, Page: 195 / 272

Share
Download
AXXIV 15S14 User Manual Download Page 195

Interface (Ports & Jacks)

Interface (Ports & Jacks) A - 3

A

HDMI-Out Port

The  HDMI-Out  (

High-Definition Multimedia Interface

) is an audio/video connector

interface for transmitting un compressed digital streams. This allows you to connect an
external monitor, TV or Flat Panel Display etc. as a display device

 

by means of a HDMI

cable. 

Note that HDMI carries both audio and video signals

.

Microphone-In Jack

Plug an external microphone in to this jack to record on your computer.

RJ-45 LAN Jack

This port supports LAN (Network) functions.

Note

: Broadband (e.g. ADSL) modems usually connect to the LAN port.

Security Lock Slot

To prevent possible theft, a Kensington-type lock can be attached to this slot. Locks can
be purchased at any computer store.

Smart Card Reader

The Smart Card reader reads pocket-sized Smart Cards, chip cards, or integrated
circuit cards (ICC) with embedded integrated circuits. Smart Cards can be used for
security identification, authentication, data storage and application processing within
large organizations.

Item

Description

Summary of Contents for 15S14

















































































































































































































































































Reviews:

No comments