Chapter 2 – Hardware Installation
23
Removing the controller from BR-1200 & BR-1600:
Remove the Fan modules by anti-clock wise to
release the thumb screws then slide it back and lift it
off.
Unscrew the two fasteners on the bracket and
backward to remove the bracket
Disconnect the host cables
Turn anti-clock wise to release the thumb screw,
then use the eject kit to remove controller board
Installing the controller into BR-1200/1600 :
Reverse the procedures as above to install the controller into BR-1200/BR-1600.
Then according to “Appendix C. Configuration table” on “Soft Operation Manual” to reconfigure
your RAID
