Chapter 2 – Hardware Installation
21
Removing the controller from PA-08/PA-16/SA-16:
Unscrew the Fasteners of Bracket then slide it back.
Disconnect the host cables.
Turn anti-clock wise to release the thumb screw.
Use the eject kit to remove controller board.
PA-08/SA-08/SA-08P PA-16
SA-16/SA-16P/PA-16P
Installing the controller into PA/08/PA-16/SA-16:
Reverse the procedures as above to install the controller into SA-16/PA-16.
Then according to “Appendix C. Configuration table” on “Soft Operation Manual” to reconfigure
your RAID
