Chapter 2 – Hardware Installation
27
Installing SODIMM
To install a SODIMM, ensure the system is power off and disconnected. Then:
1. Unscrews three fasteners.
2. Remove the daughter board.
3. Insert a memory card at a 45-degree angle into
the memory card socket so that the gold teeth
of the card are no longer visible.
4. Press the card down firmly until the latches
lock it into place.
Before starting any kind of hardware installation, please ensure that all power
switches have been turned off and all power cords disconnected to prevent
personal injury and damage to the hardware
Use screws provided with RAID system only. Longer or shorter screws may
cause electric shorting or un-proper installed.
Static electricity can damage electronic components. To guard against such
damage:
Work in a static-free environment
Wear a grounded anti-static wrist strap
Store uninstalled components in anti-static bags
Handle PCBs by their edges and avoid touching chips and connectors.
