Ethernet Packet Generator
USER GUIDE
APG-UG-V2-1
21
8 February 2018
d) Multiple APG units connected through WAN
LAN
LAN
WAN
After installing the Control Interface Application Software, the Network Interface must be
configured using the USB Interface to set the IPV4 Address, Mask and Gateway (Section
6.3.6).
Up to two Ethernet connections are supported by the Ethernet Interface, eg two
Control Interface sessions or one Control Interface session and one TCL session.
3.2.3
Sync Interface
The Sync Interface allows multiple units to be connected together for synchronous transmit
START, STEP and STOP control.
The Sync Interface is reserved for future use
3.2.4
Power
The APG unit requires a 12V 5A from the ac/dc power supply provided.
The DC Jack is 2.1mm internal diameter, 5.5mm external diameter, 9.5mm minimum length,
with the centre pin positive.
0V
12V
3.3
P
HYSICAL
S
PECIFICATIONS
Width:
140mm (5.51")
Depth:
228mm (8.97")
Height:
44mm
(1.73")
Weight: 1.20 kg (2.65 lb)