Ethernet Packet Generator
USER GUIDE
APG-UG-V2-1
37
8 February 2018
6.4
C
ONNECTION
P
ANEL
Connection to APG units using USB or Ethernet management interfaces is achieved through the
Connection Panel. Units using the USB interface will always be visible in the Connection Panel.
‘New’ IP Address field or Host Name
Connect
Checkbox
‘Managed’
Connection Status
New IP
Connection
Unit Status
USB Connection
Ethernet
Connection
Unit Serial Number
Unit ID
Connections to networked units must be defined using the
button.
Click on the Connect Checkbox to toggle the management connection.
The USB interface does not display a connection status.
The Unit Status, serial number and ID are greyed out when not connected.
The visible ports are automatically added to the counter pane when the
management interface is connected.
If an attempt is made to connect using the USB and the Ethernet interfaces
on the same unit from the same APG Control interface, the second
attempted connection will fail.
